milling-and-cleaning-set-of-injection-nozzles

Injector seat milling and cleaning kit

Product code: MG04A3065D

Brand: Lincos

The kit is suitable for renovating a diesel injector housing, cleaning an injector housing and bore, as well as a glow plug bore using milling cutters.
🟢 In stock
Locations:
  • Debrecen: 0
  • Budapest: 1
Gross price: 134,05 €
milling-and-cleaning-set-of-injection-nozzles
milling-and-cleaning-set-of-injection-nozzles
Injektor ülék maró és tisztító készlet
Injektor ülék maró és tisztító készlet
Injektor ülék maró és tisztító készlet
Injektor ülék maró és tisztító készlet

Product description

Description

  • A set that can be used for renovating and cleaning an injector seat
  • Suitable for a wide range of car types with 13 milling heads
  • The milling heads can be moved with a T-shank
  • The batteries can also be used to clean the injector housing
  • With two brush sizes
  • Glow plug is also suitable for cleaning the nest

Use

  • To repair the injector seat, first clean the area around the injector and then remove it with the sealing ring.
  • Select a milling head that is appropriate for the design of the nest.
  • Secure with an Allen key on the milling shank.
  • Use the T handle to mill. Do not apply too much pressure to the tool. Move in the direction of milling according to the design of the milling head.
  • Before cleaning the injector housing, insert the blanking plug into the nozzle hole using the retaining shank. This prevents the contaminant from entering the cylinder.
  • Attach the cleaning brush to the adapter and use the extension shank if necessary. Then move the drill to clean the nest.
  • Secure the blind plug with the stem and vacuum the removed dirt.
  • Use a long, thin brush to clean the spray tip hole. Rotate in the direction of travel.

Content

  • 2.5mm Allen key,
  • 4 cleaning brushes
  • Brush holder adapter
  • Mounting shank extension
  • 6pcs Metal blind plugs
  • Metal plug fixing shank
  • 3pcs Milling head
  • T handle
  • 19x170mm Shank
  • 13x225mm Cutter
  • Seal puller
  • Fuel storage box
  • 14mm x14mm straight milling head
  • 15.5mm x 15.5mm straight milling head
  • 15.5mm x 15.5mm angle milling head
  • 17.5mm x 20.5mm angle milling head
  • 15mm x 19mm straight milling head
  • 17mm x 19mm straight milling head
  • 17mm x 20mm straight milling head
  • 17mm x 17mm straight milling head
  • 17mm x 17mm angle milling head
  • 17mm x 17.5mm straight milling head
  • 17mm x 19.5mm straight milling head
  • 17mm x 21mm angle milling head
  • 19mm x 21.5mm straight milling head

Product packing

Pack number Dimensions Weight
1 47 x 33 x 10 cm 5 kg

Delivery fee

Delivery method Gross price
Pickup in Nagytarcsa 0,00 €
Pickup in Debrecen 0,00 €
DHL Worldwide Express 108,34 €

More products in this category

This site uses cookies to offer you a better browsing experience. Find out more on how we use cookies. If you continue to use this site without explicit acceptance, we will assume that you accept only essential cookies.