Ignition timing lamp
Product code: CKB04795
Brand: Castex
Product description
Description
A strobe lamp for setting the ignition angle. It is used to check and adjust the ignition timing of gasoline engines. Set the ignition timing as the engine manufacturer recommends. Setting the ignition ensures that the full engine power is achieved with minimal fuel consumption.
The engine manufacturer specifies the moment of ignition by specifying the ignition angle in degrees relative to the upper dead center point (GMP) of the position of the piston in the cylinder. Usually, this is a few degrees before GMP. Compare the graduated scale on the clutch housing with the mark presented on the clutch flywheel in the light of the strobe lamp to determine the ignition starting angle during engine operation.
The device most often used in car services and mechanical workshops.
Features
- Allows to determine the ignition timing during engine operation
- Detects the flow of electrical impulse to the spark plug
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 0 x 0 x 0 cm | 1.29 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 72,56 € |
More products in this category
Stud extractor set, 4pcs
This four-piece stud extractor set is a highly efficient tool designed for the quick and easy removal and installation of hard-to-reach studs.
Product code: MG93264
Oxygen sensor socket set
This kit allows quick and damage-free replacement of lambda sensors, which are an important part of exhaust gas treatment systems. Different sizes and types of keys ensure that all lambda probe types are suitable, maximizing flexibility and applicability.
Product code: MG50627
Ignition coils puller set
Ignition coils puller set, VW: Bora, Golf, new Beetle, Passat Polo, Touran, Luppo, Phaeton, Sharan, Tuareg, T5
Product code: MG50144
Stretch belt tool set, 2pcs
A universal tool set for installing tension belts on modern vehicles, which does not damage the belt or the pulley.
Product code: MG04A2313
Lambda probe tester and simulator
The lambda probe tester and simulator tests zirconia and titania lambda sensors and the ECU (engine control unit, which monitors the parts necessary for the proper operation of internal combustion engines for proper performance). Designed to accommodate 1, 2, 3, and 4 wire sensors, both heated and unheated, this versatile device takes your automotive diagnostics to the next level.
Product code: MG04D7015
Vacuum and pressure gauge
Measuring range (pressure) 0.1bar, 14, 18mm coupling adapter
Product code: MG50190
Carburetor synchroniser and vacuum/pressure tester, 0-1bar
With this kit you can synchronize the values of up to 4 carburettors and fine tune and adjust them.
Product code: MG50504
Leak tester for cylinder head gasket
CO2 Combustion leak detect. This tool is designed to check for the leaks between combustion and cooling system of water-cooled engines. With 3 adapters.
Product code: JBM53662
Combustion leak tester fluid
Combustion leak tester fluid
Product code: JBM14563
Piston ring groove cleaning tool set, 7 pcs
Quickly and reliably removes soot deposits from the groove. It has easily replaceable blades.
Product code: MG04A1040
Piston ring compressor pliers
Piston ring compressor pliers. Operating range: 110-160mm.
Product code: CKB04082
Piston ring compressor 3", 53-175mm
3" piston ring compressor. Ø 53/175mm
Product code: JBM52696
Piston ring compressor 6", 60-175mm
6" piston ring compressor. Ø 60-175mm
Product code: JBM52697
Piston ring service tool set, 9pcs
This 9-piece piston ring service tool set simplifies engine maintenance, featuring 3 piston compressors, a ring expander, groove cleaner, and a master kit. Fits diameters 53-175mm.
Product code: MG50608
Piston ring compression set
Piston ring service tool set for install piston rings; 3 pcs piston ring plates/compressors; 1 piston ring expander; Piston ring groove cleaner; 3 blades
Product code: JBM53251
Ribbed belt remover and installer tool set, universal
Ribbed belt remover and installer tool set, for Alfa Romeo, Audi, BMW, Chrysler, Fiat, Ford, Mercedes, Seat, Skoda, Smart, PSA, Volvo, VW
Product code: JBM51927
Cambelt tension wrench set, 14pcs
Cambelt tension wrench set with 13 interchangeable adapters, suitable for almost all types of vehicles.
Product code: MG04A2305
Tool for fitting and removing stretch ribbed belts
This tool is a versatile and essential tool for fitting and removing stretch ribbed belts. This specialized tool is designed to simplify the process of working with stretch ribbed belts.
Product code: W0267
Universal belt tensioner wrench set
Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm
Product code: MG50635B
Universal belt tensioner wrench set
Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm
Product code: JBM52832
Adjustable camshaft pulley holder, length 420mm
For tensioning or loosening the belt pulleys, adjustable opening 12-150mm.
Product code: MG50673
Universal pulley and fan clutch holder set
This tool kit designed with grooved pins that hold the camshaft pulley firmly in place.
Product code: MG91630
Key to block unscrewing of the pulley Mercedes-Benz M272 / M273 engine
Product code: W0677
Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI
Viscous clutch wrench Mercedes Sprinter 906 218, 318, 418, 518 CDI
Product code: W0239
Key viscous clutch Ford Transit 2.3 2.4 3.2 (2001 – 2006)
Product code: W0416
Wrench for shaft belt pulley unscrewing, VW, Audi, Volvo
A special tool that can be used to unscrew the axle disc for VW, Audi and Volvo vehicles.
Product code: W0085
Belt pulley wrench for BMW diesel engines
Belt pulley wrench for BMW diesel, E87, E46, E60, E61, E90, E91.
Product code: W0082
Timing belt tightener for VAG car engines
Timing belt tensioner wrench for VAG car engines.
Product code: W0039
Tool to remove water pump pulley VW / AUDI
Product code: W0328
Universal camshaft pulley locking tool set, 4 pairs of bit adapters
Universal camshaft pulley locking tool set, 4 pairs of bit adapters.
Product code: W0238
VW Crankshaft Sealing Flange Removing and Installing Tool (Petrol)
This crankshaft seal installer tool is designed for Volkswagen, Audi, Skoda 16v 1,4, 1,6 engines and it’s also used on Fiat BAG 1,6 engines.
Product code: MG04A1026
Crankshaft seal installing tool for VAG (petrol and diesel engines)
Special purpose tool for the precise installation of shim rings/shim ring housings with a speed sensor on the rear (transmission side) side of the crankshaft.
Product code: MG04A1028
Puller (32x1,25) To pull sprocket a chain and the sleeve damper crankshaft in the DKW SB 350, NZ 250, NZ 350, F8 other model
Product code: W426K
Face mill cutter for the shaft Porsche 911 G 2.7, 3.0 and 3.2
This face mill cutter is specifically designed for cutting and preparing Porsche 911 G 2.7, 3.0 and 3.2 engine shafts. Thanks to the M12x1.5 thread size, it fits easily on shafts with the appropriate thread.
Product code: W0672
Face mill for crankshaft, VW TDI 1.9, 2.5
Face mill for the crankshafts of VW TDI 1.9, 2.5 engines.
Product code: W0017
Face mill cutter for Fiat 1.4 16V shafts
This face mill is specially designed for cutting and preparing Fiat 1.4 16V engine shafts. The cutting diameter of the tool is 32 mm, which is the ideal size for machining the front surface of Fiat 1.4 16V engine shafts. Thanks to the M12x1 thread size, it fits easily to shafts with the appropriate thread.