Wrench / Socket for KM 14 lock nut teeth from inside

Universal socket wrench 7-19 mm ¼-3/4”

Its ability to adapt to various fastener sizes and shapes, combined with its compatibility with ratchets and power tools, makes it ideal for a wide range of applications.

Product code: CKB10128

Universal socket adapter 7 to 19mm diameters

The universal socket is designed to automatically adjust to fit any nut or bolt with 7 to 19mm (1/4" to 3/4") diameters.

Product code: G15020

Universal socket adapter 7 to 19mm diameters

Universal socket adapter. For nuts and bolts with 7 to 19mm diameters.

Product code: G15021

Multifunctional socket wrench 48in1. Socket diameters: 8-19mm

It can replace wrenches intended for 12-point, 6-point, 4-point, E-Torx and spline screws and nuts.

Product code: G15030

Key / nut for the bearing nut KM 12

This tool provides a secure fit and facilitates proper tightening or loosening of locknuts during bearing installation or removal processes. The key is made using hardened, high-quality materials, ensuring durability and strength, so it can withstand the forces that occur when working with bearings and lock nuts.

Product code: W0513

Key/nut for the bearing nut KM 10, internal stud bolt

This tool is provide a secure fit and facilitate the proper tightening or loosening of the locknut during bearing installation or removal processes. The key/nut is manufactured using hardened, high-grade materials to ensure durability and strength, making it capable of withstanding the forces involved in working with bearings and locknuts.

Product code: W0573

Spanner rocker pin cap Citroen C5 III , C6 / Peugeot 305 / 405/ 605 / 607 (hardened)

The tool is allows access and fixing to the rocker arm pins for Citroen C5 III, C6 / Peugeot 305 / 405 / 605 / 607 models.

Product code: W0289

Special socket set for A/C and ECU repair

For special safety screws. Suitable for A/C units for MAFs, for ECUs, for the injector air supply, for mass sensors.

Product code: MG50128

Lock nut socket wrench KM13 for bearing nuts

Lock nut socket wrench KM13, 6 teeth, thread: M65 x 2, internal teeth.

Product code: W0648

Adapter to remove the pins down on the Renault Master 2006

Adapter to remove the pins down on the Renault Master 2006

Product code: W0160

Wrench for wheel bearing nut, rear axle, Mercedes Sprinter, VW LT

A tool designed for the removal and installation of rear axle wheel bearing nuts.

Product code: W0236

The key to the lock nut KM9

The socket wrench is designed for safe and easy tightening and loosening of bearing nuts.

Product code: W0472

Key / nut for the bearing nut KM 6 , studs internal

Product code: W0572

Windscreen nozzle adjusting tool Opel Astra J, Insignia, Cascada, Zafira

Designed specifically for the unique washer jets fitted to vauxhall/opel vehicles. Ideal for adjusting stuck windscreen nozzles. With four gripping claws and angled profile.

Product code: W0638

Socket/Wrench For bearing nuts KMT 19 (6 teeth)

It is specifically made to handle the demanding requirements of low loader trailers. The socket/wrench is hardened to ensure durability and withstand the high torque needed to tighten or loosen bearing nuts. It is made of high quality material for strength and reliability.

Product code: W0644

The key to the lock nut KM 12, 6 teeth

A special tool that can be used to tighten or loosen lock nuts. It provides great help, thanks to its hardened design and high load capacity.

Product code: W0650

Socket / Wrench For lock nuts, KM 20

The Socket/Wrench is designed to fit lock nuts with KM20 specifications, ensuring a precise and snug fit. The outer diameter of 130mm and internal diameter of 121mm are tailored to match the dimensions of the lock nut for optimal functionality.

Product code: W0702

Lock nut socket wrench, KM2

Specialized tool that is designed to fit the specific dimensions of the KM2 lock nut, allowing for precise and efficient tightening or loosening.

Product code: W0717

The key to loosening the nut of crankshaft bearings for motorcycles DKW SB other models

Product code: W425K

Wheel hub socket wrench Mercedes, inner diam.: 55mm

Wheel hub socket wrench Mercedes, inner diam.: 55mm.

Product code: W0146

Socket wrench for M52x1.5 Mercedes Vario rear hub nuts

Our Socket Wrench for M52x1.5 Mercedes Vario rear hub nuts is the perfect tool for unscrewing wheel hub nuts on the rear axle of your Mercedes Vario (1996-2013). With an OE code of 6743560126, this wrench offers precise and efficient performance. Get yours today!

Product code: W0338

Front hub nut wrench for Iveco Daily (2004-2019)

Front hub nut wrench for Iveco Daily (2004-2019).

Product code: W0354

Key / nut for the bearing nut KM 11 , studs internal

This tool is provide a secure fit and facilitate the proper tightening or loosening of the locknut during bearing installation or removal processes. The key/nut is manufactured using hardened, high-grade materials to ensure durability and strength, making it capable of withstanding the forces involved in working with bearings and locknuts.

Product code: W0508

Front axle hub socket wrench for Suzuki Jimny, Vitara, Grand Vitara

Front axle hub socket wrench for Suzuki Jimny, Vitara, Grand Vitara. Diameter: 56mm, hexagonal drive.

Product code: W0562

Lock nut socket wrench, KM 4, 28.3mm, 4 teeths

Socket wrench for bearing nuts, KM 4, 28.3mm, 4 teeths, hex drive.

Product code: W0565

Key / nut for the bearing nut KM 8 , studs internal

This wrench is specifically designed to fit the KM 8 groove nut with teeth on the inside.

Product code: W0567

Bearing nut socket wrench, KM5, 44.3mm

These wrenches are used to tighten the nuts that attach the axles to the wheels of the car. The keys ensure that the axles are properly attached to the wheels and allow maintenance work to be carried out.

Product code: W0568

Key / nut for the bearing nut KM 7 , studs internal

Product code: W0569

Key / nut for the bearing nut KM 4 , studs internal

Product code: W0570

Lock nut wrench for KM16 locknuts

Lock nut wrench for KM16 locknuts. O.D.: 109mm. I.D.: 97.6mm.

Product code: W0624

Socket for loosening the crankshaft nut crankshaft and camshaft attacker SCANIA M44x1.5 mm

Crafted with precision and durability in mind, this socket is engineered to provide a secure grip on the crankshaft nut and camshaft attacker of SCANIA engines with M44x1.5 mm specifications. With its perfect fit and robust construction, it ensures efficient and reliable loosening.

Product code: W0646

Lock nut socket wrench, KM17

Designed for safe and easy tightening and loosening of lock nuts.

Product code: W0700

Lock nut socket wrench, KM15

A hardened socket wrench with 4 gripping claws for KM15 bearing retaining locknuts KM15. Inner diameter: 90mm. Hex drive.

Product code: W0701

Key / cap to the pin arm KIA CEED, Hyundai i30 (4 teeth)

Key / cap to the pin arm allows access and fixing of rocker arm pins and fits Kia Ceed and Hyundai i30 models.

Product code: W0473

KM10 socket wrench for unscrewing the wheel hub nut of the Mercedes G class

The socket wrench is specifically designed for the precise and safe removal and installation of the wheel hub nuts of Mercedes G class cars. With its dimensions and design, the socket wrench ensures an optimal fit with the wheel hub nuts, allowing them to be handled quickly, easily and without damage.

Product code: W0504

Socket / Wrench For lock nuts, KM 18

The socket wrench is designed for safe and easy tightening and loosening of lock nuts.

Product code: W0722

Socket / Wrench For grooved bearing nuts KM 13 ; teeth from the inside

This socket wrench is tailored to fit grooved bearing nuts of KM 13 type. It has teeth on the inside to ensure a snug grip on the bearing nut, allowing for efficient loosening and tightening.

Product code: W0727

MAN front axle cap, 6 teeth, 92.50mm

Designed specifically for MAN trucks, ensuring seamless integration and optimal performance. Meticulously crafted with a 6-teeth configuration, providing superior fit.

Product code: W0732

Socket 6 Teeth, 107mm for Low Floor Trailers

This is an essential tool for professionals working on low floor trailers. Featuring a robust 6-teeth configuration, it ensures accurate engagement and superior grip.

Product code: W0733

Hex Socket Adapter Kit

Hex socket wrench adapters for 1/4, 3/8, 1/2 sockets. It is made of 40Cr steel, the additional surface is oxidized. The perfect addition to any toolbox.

Product code: CKB01164

Stud extractor, 1/4"-3/4"

A stud driver (also known as a stud puller) is a tool that is commonly used in automotive repair when a stud is stuck or cracked in the vehicle's chassis or other structural component.

Product code: MG50047

Offset oxygen sensor socket. Diameter: 22mm, Drive: 3/8" square

Common 6 point, 7/8 in (22mm) socket, suitable for most oxygen sensors.

Product code: G02686

Set of lambda probe oxygen sensor, vacuum switch remover

Professional set of lambda probe caps 7 pcs. 1/2", 3/8" x 22, 27, 29 mm. Suitable for removing and installing oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches and break light switches.

Product code: CKB04042

Lambda probe oxygen sensor socket set

Lambda (hot) end cap 22 mm x 50 mm, 1/2" square drive. Vacuum sensor and lambda probe (for low-seated probes) 22 mm x 30 mm, 3/8" square drive.

Product code: CKB02575

Wrench for initial chamber nut, Mercedes, Fiat

The Wrench for initial chamber nut is specially designed for Mercedes and Fiat vehicles, ensuring professional and reliable use. The key's screw is 150mm long and has an M24x2 thread size, ensuring a perfect fit and a strong fixing. The tool is made of high quality material that guarantees long life and resistance to frequent use.

Product code: W0056

Service wrench for initial chamber 1/2", 60mm

Service wrench for initial chamber 1/2", 60mm

Product code: W0081

Rocker arm nut wrench for Citroen, Peugeot

Rocker arm nut wrench for Citroen XM, Xantia X1i, X2, C5 I / II , Peugeot 405 I / II ,406 ,605 ,607 cars.

Product code: W0194

5pcs strut nut tool set for Audi, VW and Mercedes

A set of nut tools for tightening and loosening shock absorber mounts.

Product code: G02785

Key 24 with mounting the socket

Product code: W0293

Wheel hub nut socket wrench for Renault

Wheel hub nut socket wrench for Renault Mascott, Midlum, Premium (nut OEM 5010372353).

Product code: W0309

Wrench nut bolt Mercedes ML - W 163 ML ; W 164 ML

Wrench nut bolt specifically designed to fit and loosen/tighten the nut bolts used in various components of the vehicle. These nut bolts can be found in different areas of the ML, such as the suspension, engine, or other mechanical parts.

Product code: W0366

Key to loosening the rear hub nuts M55X1,5 Mercedes Sprinter, VW Crafter after 2006 (hardened)

Key to loosening the rear hub nuts is designed to fit the specific dimensions of the hub nut and provide the necessary grip and torque for loosening it.

Product code: W0403

Wrench for the front wheel hub nuts of Iveco 35 vehicles

Special key for mounting and dismounting the front hub nut of Iveco 35 vehicles. Inner diameter: 62.5mm.

Product code: W0502

Socket wrench for KM10 lock nuts, 78.5mm

Socket wrench for KM10 lock nuts, 78.5mm, hexagonal drive

Product code: W0507

Key / nut for the bearing nut KM 11

This tool is provide a secure fit and facilitate the proper tightening or loosening of the locknut during bearing installation or removal processes. The key/nut is manufactured using hardened, high-grade materials to ensure durability and strength, making it capable of withstanding the forces involved in working with bearings and locknuts.

Product code: W0509

Bearing nut socket wrench, KM 12, internal pins

Bearing nut socket wrench with internal pins. For KM12 M60 x 2 nuts.

Product code: W0510

Cap / key of the bearing grooves 8 hp; 58mm

This cap/key is designed for bearings with 8 grooves and a diameter of 58mm. It is constructed using high-grade materials, ensuring durability and reliability during use. The purpose of the Bearing Groove Cap/Key is to provide a secure fit over the bearing, allowing for easy installation, removal, or adjustment.

Product code: W0544

Lock nut socket wrench, grooved, KM7

Lock nut socket wrench, grooved, KM7.

Product code: W0545

Key / nut for the bearing nut KM 9 , studs internal

This wrench is specifically designed to fit the KM 9 groove nut with teeth on the inside.

Product code: W0564

Set adapter for pressing the Mercedes Smart hub

Product code: W0575

Wrench for the front swingarm pivot pin caps on Citroen, Peugeot, Toyota

Socket wrench for the front swingarm pivot pin caps on Citroen (Jumpy, SpaceTourer), Peugeot (Expert, Traveller), Toyota (Proace) suspensions. 2016 and on.

Product code: W0577

Wrench / Cap for KM 5 grooved nut from the inside

The tool is allows for reliable and powerful tightening or loosening and ensures that the nut is properly fixed.

Product code: W0579

Wrench for KM13 bearing nuts

Wrench for KM13 bearing nuts with an outer diameter of 91mm and an inner diameter of 78mm, this wrench provides a secure and accurate grip on the specific size of KM13 bearing nuts.

Product code: W0592

Rear axle nut wrench for Renault, Nissan, VW, Opel, Mercedes

For loosening the groove nut on rear wheel hubs. OEM codes: T50017, CH50112, 906589000700, 8201079089

Product code: W0608

The wheel hub of the Toyota Land Cruiser ( 09509-25011 )

Product code: W0612

Key / cap bolt arm Renault Clio III, Renault Megane III RS

Product code: W0621

Wrench / Cap for loosening the wheel hub nut IVECO DAILY 55s17 4x4 REAR (oe nuts 42558514)

Product code: W0622

Wrench for Iveco 35 front wheel hub nuts

This wrench is specifically designed to fit front wheel hub nuts with internal teeth and M50*1.5 thread dimensions.

Product code: W0664

Socket wrench for lock nuts, KM14

Designed for safe and easy tightening and loosening of lock nuts.

Product code: W0694

Socket wrench for KM1 lock nuts

Outer diameter: 26mm, inner diameter: 18.5mm, tooth: 2.3mm, length: 45mm. Helps to prevent damage to the nuts.

Product code: W0716

Lock nut socket wrench, KM3

Outer diameter: 32mm, inner diameter: 25mm, teeth: 3.6mm, length 45mm.

Product code: W0718

Nut cap for Goldhofer THP/SL4 trailer; 6 teeth, teeth inside

The Nut Cap with 6 internal teeth and a tooth distance of 107 mm is a specialized component used in Goldhofer THP/SL4 semi-trailers to secure and maintain critical parts of the trailer's assembly.

Product code: W0726

The wrench for the side pressing nut of the Mercedes steering rack

This tool is ideal for professionals and DIY enthusiasts alike, this tool ensures seamless installation, removal, and adjustment of the steering gear side pressure nut.

Product code: W0728

Wrench for BMW & Mercedes Steering Gear Side Nut

This is a dedicated wrench, purposefully designed for the assembly, disassembly, and adjustment of the side nut in BMW and Mercedes steering gears.

Product code: W0729

Rocker Arm Nut Wrench for Iveco Daily 2006 E4

This tool is specifically tailored to unscrew the nut of the rocker arm.

Product code: W0734

Steering Knuckle Nut Wrench for Mercedes Actros, Axor, Antos, Arocs

This wrench is designed for unscrewing the steering knuckle nut of specific Mercedes trucks. It offers a precise fit and is compatible with both OEM and certain aftermarket parts.

Product code: W0735

Shaft puller for manual gearbox, Fiat Ducato 2.8 JTD

Shaft puller for manual gearbox, Fiat Ducato 2.8 JTD

Product code: W0253