Exhaust camshaft locking and wedging tool 1.2 VTI
Product code: C01/0270
Brand: Lincos
Product description
Description
The Exhaust Camshaft locking and wedging tool 1.2 VTI is used when it is necessary to fix and align the exhaust camshaft of a vehicle engine. This can usually happen in the following cases:
- Camshaft Replacement: When the camshaft needs to be replaced, the alignment tool helps keep it in the correct position during installation and adjustment.
- Timing Adjustments: The alignment tool can be used to fine-tune the camshaft position during timing adjustments. This ensures that the exhaust valves open and close at the correct times.
Here are the items included in the kit
- Crankshaft Seal Ring: This ring is used for sealing the crankshaft, preventing oil leaks and maintaining proper lubrication.
- Gasket (Gear Wheel): The gasket provides a seal between the gear wheel and its mounting surface, ensuring a tight and secure fit.
- Water Pump Drive Belt: This belt is responsible for driving the water pump, ensuring proper coolant circulation within the engine.
- Screws (Camshaft Phasing Units and Camshafts): These screws are used to secure the camshaft phasing units and camshafts in place, maintaining their proper alignment.
- Bolts (Crankshaft / Crankshaft Hub): The bolts are used to secure the crankshaft to the crankshaft hub, ensuring a strong and stable connection.
- Bolts (Crankshaft Hub / Crankshaft): These bolts secure the crankshaft hub to the crankshaft, ensuring a secure and accurate fit.
- Gasket (Upper Cylinder Head Cover): The gasket provides a seal between the upper cylinder head cover and the cylinder head, preventing oil leaks and maintaining proper compression.
- Cylinder-Head Caps: These caps are used to cover and protect the cylinder head, providing an additional layer of protection against contaminants and ensuring proper sealing.
Product packing
| Pack number | Dimensions | Weight |
|---|---|---|
| 1 | 16.6 x 11.8 x 4.6 cm | 0.36 kg |
Delivery fee
| Delivery method | Gross price |
|---|---|
| Pickup in Nagytarcsa | 0,00 € |
| Pickup in Debrecen | 0,00 € |
| DHL Worldwide Express | 61,67 € |
More products in this category
Cambelt tension wrench set, 14pcs
Cambelt tension wrench set with 13 interchangeable adapters, suitable for almost all types of vehicles.
Product code: MG04A2305
High pressure pump sprocket remover for Hyundai and KIA
High pressure pump sprocket remover and flywheel lock for Hyundai and KIA. For chain driven 1.1, 1.4, 1.5, 1.6, 1.7 CRD diesel engines.
Product code: MG04A2331
Timing tool set, for BMW, N42, N46, N46T
Timing tool set for BMW, NN42, N46, N46T
Product code: JBM53259
Flywheel and camshaft locking pin set, universal
Flywheel and camshaft locking pin for diesel and petrol engines.
Product code: MG50088
Engine timing tool set for Opel 1.6 CDTI Ecoflex
Engine timing tool set for Opel 1.6 CDTI Ecoflex
Product code: C01/0237
Timing lock for BMW N40, N45 engines
Timing lock for camshafts and variators for BMW N40, N45, N45T (B16) 2001-2009 engines.
Product code: C01/0096
BMW timing locks for engines M42, M44, M50, M52, M54
BMW timing locks - M42, M44, M50, M52, M54.
Product code: C01/0052
Timing tool set for BMW N51, N52, N52K, N53, N54, N55 2.5 and 3.0 engines
Timing tool set for BMW N51, N52, N52K, N53, N54, N55 2.5 and 3.0 engines. OEM: 11.4.280, 11.4.281, 11.4.282, 11.4.283, 11.4.285, 11.4.290, 11.0.300, 11.8.520/521, 11.9.340.
Product code: C01/0235
Camshaft lock for BMW
Camshaft lock for BMW M40, M43 models E30, E34, E36
Product code: W0139
Timing lock for Volvo V8 4.4l
Keep your Volvo V8 4.4l engine running smoothly with our timing lock. Prevent costly engine damage and ensure optimal performance.
Product code: W0659
Exhaust camshaft locking and wedging tool 1.2 VTI
This tool is a comprehensive set of tools designed for specific tasks related to the exhaust camshaft locking and alignment process. This kit includes various components and tools to ensure precise and efficient work.
Product code: C01/0270
Flywheel lock kit for Mercedes, Renault, Dacia
The kit includes the necessary tools to lock the flywheel securely in place, preventing it from rotating during procedures such as clutch replacement, flywheel removal, or timing belt replacement. This ensures precise work and prevents damage to the engine components.
Product code: JBM54289
Timing tool set for BMW, Land Rover, Opel 2.5 TD5
Timing tool set for BMW, Land Rover, Opel 2.5 TD5 diesel engines.
Product code: MG50311
Timing tool set for Opel, Suzuki
For 1.3 CDTI/DDIS chain-driven, diesel engines
Product code: MG50310A
Timing tool set for Fiat
This timing tool kit is specifically designed for a wide range of Fiat vehicles, including models like Bravo, Brava, Stilo, 500, Punto, Grande Punto, Idea, Marea, Marea Weekend, and Palio Weekend, as well as the Lancia Ypsilon, supporting 1.2 16V petrol engines. The kit is the ideal toolset for precise adjustment and securing of the engine timing system during repair and maintenance tasks.
Product code: MG50308
Timing tool set for Land Rover, Jaguar
For 2.7TD V6 engines
Product code: MG50307
Timing tool set for Ford
For 1.6 Ti-VCT, 2.0 TDCi engines, Focus, C-Max
Product code: MG50305
Timing tool set for Renault
This timing tool set is developed for Renault's double camshaft engines, specifically designed for the 1.2, 1.4, 1.6, 1.8, and 2.0 16V petrol engines, as well as the 2.2D, TD, 2.2Td, 2.2TD, 2.5D, and 2.5D, TD diesel engines. This tool is essential for accurate and safe camshaft positioning and timing adjustment during repair and maintenance work.
Product code: MG50089
Timing tool set for Opel, Saab
This timing tool set includes camshaft and crankshaft locking tools tailored for 1.9 CDTI/TID engines with timing belts, commonly found in Opel and Saab vehicles. The set ensures precise alignment of the camshaft and crankshaft to facilitate smooth and accurate timing belt replacement or engine repair.
Product code: MG50087
Timing tool set for Citroen, Peugeot
The Timing Lock for Citroën and Peugeot vehicles is a comprehensive tool kit that is of great help in servicing a wide range of petrol and diesel engines. This kit is specifically designed to accommodate 1.0-2.2 liter engines and covers a wide range of models and engine configurations including 16V (Turbo, Twin Cam) petrol engines and various diesel engines such as D, TD, TDI and HDI.
Product code: MG50085
Timing tool set for VW, Audi, Skoda, Seat
Timing tool set for VW group, for diesel: 1.7, 1.9 D/TD/SDI/TDI; 2.5, 3.3 TDI; 1.2, 1.4, 1.9, 2.0 PD TDI, petrol: 1.4, 1.6, 1.8, 1.8T, 2.0, 2.0 16V, 2.0FSI; 1.2 6V, 1.2 12V engines
Product code: MG50082
Timing tool set for Fiat, Opel
For 1.9, 2.4 D, TD, JTD, CDTI, 1.3 CDTi, JTD Multijet, DDiS engines
Product code: MG50080
Opel 1.0 1.2 1.4 Turbo Engine Timing Tools Set
For Opel 1.0, 1.2 and 1.4 Twin Cam turbocharged engines. The kit is suitable for fixing the camshaft and the crankshaft position when removing and replacing the timing chain.
Product code: MG04A2193
Engine timing locking tools set for Citroën/Peugeot 1.0/1.2 VTi
A complete shim and timing lock assembly designed for use on a wide range of vehicles Citroën/Peugeot 1.0/1.2 VTi
Product code: JBM53876
Timing tool set for Renault, Nissan, Opel, Volvo
Motor petrol: 2.0 16V / 2.5 20V / 1.4 / 1.6 16V / 1.8 / 2.0 16V / 1.2 / 1.7 / 1.8 / 2.0 16V / 2.2, Motor diesel 1.9 / 2.5 / 2.8
Product code: JBM53769
Timing tool set for Opel, Suzuki 1.0, 1.2, 1.4
Timing tool set for Opel, Suzuki 1.0, 1.2, 1.4 petrol engines with timing chain.
Product code: JBM53301
Timing tool set for Ford, Jaguar, Duratorq
For 2.0, 2.2, 2.4 TDDI, TDCI, engines with timing chain
Product code: JBM53296
Engine timing tool set renault Opel 2.2/2.5 TDi DCi
Timing tool set for Opel, Nissan, Dacia, Renault. 2.2, 2.5 DCI, DTI Renault, 2.2 16V petrol engines.
Product code: JBM53292
Audi VW enging timing tool set V6 2.0/2.8/3.0 TFSI
Audi - VW enging timing tool set. For vehicles Audia A2, A3, A4, A6, A8 with motor V6 2.0/2.8/3.0 TFSI
Product code: JBM53278
Engine timing tool Audi & Škoda
Engine timing tool Audi, VW & Škoda. For vehicles Audi / VW V6 2.0 - 2.8 - 3.0T FSI , Audi Q5 2.0 - A6L 2.8 - 3.0T
Product code: JBM53276
Ribbed belt remover and installer tool set, universal
Ribbed belt remover and installer tool set, for Alfa Romeo, Audi, BMW, Chrysler, Fiat, Ford, Mercedes, Seat, Skoda, Smart, PSA, Volvo, VW
Product code: JBM51927
Opel 1.0, 1.2, 1.4 turbo engine timing tools set
For Opel 1.0, 1.2 and 1.4 twin cam turbocharged, chain driven, petrol engines. The kit is suitable for fixing the camshaft and the crankshaft position when removing and replacing the timing chain.
Product code: CKBA2193
Engine timing tool set for VAG 2.4 and 3.2 FSI
Professional set of locks for cars from the Volkswagen and Audi group for Audi V6, V8 and V10 with a chain for petrol engines with a capacity of 2.4, 3.2, 4.2 and 5.2 liters. It is used to check and adjust the timing.
Product code: CKBA2027
Oil filter pliers 10"
Oil filter pliers 10". For universal use.
Product code: CKB04061
Crankshaft and camshaft locking set for VW Audi V6, V8 TDI
Crankshaft locking pin, camshaft locking device for VW, Audi, Skoda V6, V8 TDI .
Product code: CKB01654
Timing belt tensioner wrench for VW, Audi
Timing belt tensioner wrench for VW, Audi
Product code: CKB01629
Adapter for Mercedes CDI injectors
13mm claw puller for Mercedes CDI injectors.
Product code: C04/0102
Silent remover and installer press with adapters for Movano, Master, Nissan
Press with bushing sleeves for the top link of the swingarm of Opel Movano, Renault Master, Nissan Interstar. Universal press for extruding and pressing pins, metal-rubber sleeves, ball pins and many elements that are within the dimensions of the press.
Product code: C02/0145
Timing lock for Citroen, Peugeot, Opel 1.2 Vti (VVT), GDI
This tool kit makes it easy to change the timing belt without having to disassemble multiple components. Allows you to determine if the belt needs to be replaced without having to disassemble the engine.
Product code: C01/0230
Engine timing tool set for BMW, Mini (B38, B46, B48)
This engine timing tool set was specially designed for new generation BMW and Mini chain driven B38, B46 and B48 engines since 2014.
Product code: C01/0225
Camshaft timing tool Mercedes Benz M156 and M159 engines
Tool for adjusting the timing during chain change for Mercedes Benz 6.2L V8 engines.
Product code: C01/0217
Timing lock for Renault, Mercedes and Nissan petrol engines
Timing lock for Renault, Mercedes, Nissan petrol engines with turbo charge.
Product code: C01/0201
Renault, Nissan timing lock 1.6 DCI
Timing lock set for Renault, Nissan 1.6 DCI, R9M engines.
Product code: C01/0200
Flywheel locking tool for Ford 2.0 TDCI Ecoblue and 1.0 Ecoboost
Flywheel locking tool for Ford 2.0 TDCI Ecoblue and 1.0 Ecoboost.
Product code: C01/0198
Timing lock Ford 2.2 TDCI engines
Timing lock Ford 2.2 TDCI Transit, Econetic HDT diesel engines.
Product code: C01/0191
Timing lock for BMW, Rover diesel engines with common rail
Timing lock for BMW, Rover diesel engines with common rail.
Product code: C01/0185
Timing lock for Fiat 1.1, 1.2 engines
Timing lock for Fiat 500, Panda, Grande Punto 1.1, 1.2
Product code: C01/0183
Timing locking pins for Fiat 1.2, 1.4 T-Jet
Timing locking pins for Fiat, Lancia 1.2, 1.4 16V T-Jet petrol engines.
Product code: C01/0180
Timing lock set for VAG 1.4, 1.6 FSI / TFSI
Timing lock set for VAG, Skoda, Audi, Seat, VW 1.4, 1.6 FSI / TFSI
Product code: C01/0175
Socket for removing rear axle nut in Mercedes Vario
Socket for removing rear axle nut in Mercedes Vario.
Product code: C01/0164
Timing lock for Skoda, Audi, VW, Seat 1.4, 1.6
Timing lock for Skoda, Audi, VW, Seat 1.4, 1.6 (FSI / 16V)
Product code: C01/0118
Shaft locking pin for VW TSI, FSI, TFSI engines
Shaft locking pin for VW TSI, FSI, TFSI engines
Product code: C01/0090
Crankshaft lock for Audi 3.0 V6
Locking pin for crankshaft of Audi 3.0 V6 petrol engines
Product code: C01/0081
Engine timing lock for Ford 2.0 and 2.4 diesel engines
Engine timing lock for Ford 2.0 and 2.4 diesel engines.
Product code: C01/0074
Timing lock for BMW 2.5 and 3.0 engines N51, N52, N52K, N55
Application: N51, N52, N52K with Valvetronic and N55.
Product code: C01/0070
Timing lock for BMW M40, M42, M43, M44, M50, M52, M54 engines
Timing lock for BMW M40, M42, M43, M44, M50, M52, M54 engines
Product code: C01/0066
Flywheel locking tool for Ford diesel, petrol and Ecoboost engines
Four interchangeable crankshaft locking adapters required for replacing and repairing the crankshaft pulley and replacing the Ford timing belt - for gasoline, diesel engines and Ecoboost 1.0.
Product code: C01/0063
Timing lock for BMW M42, M44, M50, M52, M54, M60, M62 engines
Timing lock for BMW M42, M44, M50, M52, M54, M60, M62 engines.
Product code: C01/0053
Timing lock for BMW M52, M54, M56, M52TU engines
Timing lock for BMW M52, M54, M56, M52TU engines with Vanos system.
Product code: C01/0051
Timing lock for BMW M43, M70, M73 engines with timing chain
Timing lock for BMW M43, M70, M73 engines with timing chain.
Product code: C01/0050
Engine timing lock for Ford 1.0 and 1.1 Ecoboost
Engine timing lock for Ford 1.0 and 1.1 Ecoboost
Product code: C01/0043
Timing lock set for BMW M40, M42, M43, M44, M50, M52, M54 engines
Timing lock set for BMW M40, M42, M43, M44, M50, M52, M54 engines.
Product code: C01/0042
Camshaft lock for BMW M60, M62 engines
Camshaft lock for BMW M60, M62, 730i, 740i, 535i, 540i, 735i, 740i, 840i, X5 engines.
Product code: C01/0039
Timing lock for BMW M60, M62 engines
Timing lock for BMW M60, M62, 730i, 740i, 535i, 540i, 735i, 840i, X5 engines.
Product code: C01/0038
Locking pin for VAG injection pump
Locking pin for VW, Audi, Skoda, Seat, Ford injection pumps.
Product code: C01/0031
Timing lock for Opel 1.4
Timing lock for camshaft and chain sprocket on Opel 1.4 petrol engines (2010-)
Product code: C01/0025
Timing lock for BMW 1.6 N43, B16, B20 engines
Timing lock for BMW 1.6 N43, B16, B20 engines.
Product code: C01/0024
Timing lock for Citroen and Peugeot 1.8, 2.0
Timing lock for Citroen and Peugeot 1.8, 2.0 16V engines.
Product code: C01/0016
Timing lock for Citroen, Peugeot 1.8, 2.0, 2.2
Timing lock for Citroen, Peugeot 1.8, 2.0, 2.2
Product code: C01/0006
Camshaft lock for Fiat, Lancia 1.2 8V Evo
Camshaft lock for Fiat, Lancia 1.2 8V Evo.
Product code: C01/0005
Crankshaft lock for Ford 1.8 / 2.0 TDDI TDCI
Crankshaft lock for Ford 1.8 / 2.0 TDDI TDCI
Product code: C01/0004
Timing belt tensioner key for HDI engines
Timing belt tensioner key for HDI engines
Product code: W0222
Timing tool set, Mitsubishi 1.8 - 3.5 16V
This Timing tool set is of high quality and precisely dimensioned to ensure a stable fixing of the engine timing system. The reliable fastening allows easy and efficient removal and installation of control discs, timing belts or other timing system components.
Product code: W0261
Timing tool set Volkswagen Touareg, Phaeton 5.0 V10 TDI
Timing tool set Volkswagen Touareg, Phaeton 5.0 V10 TDI
Product code: W0276
Camshaft Lock Volkswagen Audi 2.6, 2.8 V6 / V8
Specifically designed for V6 and V8 gasoline engines manufactured between 1991 and 2000. Precise design ensures accurate and reliable control adjustment during critical engine repair and maintenance tasks.
Product code: W0322
Cam lock VW 2.5 / 4.9 D / TDI PD - 5-cyl and 10-cyl
Product code: W0340
Timing lock for Renault, Nissan 1.6 DCI
Timing lock for Renault, Nissan 1.6 DCI.
Product code: W0464
Timing lock set for Ford 1.6 EcoBoost engines
Timing lock set for setting Ford 1.6 EcoBoost engines into the timed position.
Product code: W0524
Lock timing Jeep Grand Cherokee CRD; Grand Cherokee Multijet 3.0 CRD V6
The Timing Lock is a specialized tool designed for locking the timing system of Jeep Grand Cherokee CRD and Grand Cherokee Multijet 3.0 CRD V6 vehicles. It aids in the accurate installation and adjustment of the timing belt or chain, contributing to the overall performance and longevity of the engine.
Product code: W0563
Timing lock Porsche 911, Boxster, Cayman 2.7, 3.2, 3.4, 3.6, 3.8
This tool is used to lock the engine's timing components in place during maintenance or repair procedures, ensuring precise alignment and synchronization of the camshafts and crankshaft. Accurate timing is essential for optimal engine performance and efficiency.
Product code: W0626
Timing tool set for BMW N45 B20 SI engines
Timing tool set for BMW N45 B20 SI with camshaft adjuster is a special tool developed for BMW N45 B20 SI engines, which helps to fix and stabilize the engine control unit during maintenance or repair work.
Product code: W0653
Timing wheel locking tool Subaru 2.5, Boxer
Built with precision and durability in mind, this timing wheel locking tool provides a secure and reliable method for locking the timing wheel in place during maintenance or repair procedures. By immobilizing the timing wheel, it allows for accurate alignment and tensioning of the timing belt or chain.
Product code: W0689
Engine timing tool set for BMW (N51/N52/N53/N54/N55)
This tool set is specifically designed for a wide range of BMW 2.5 and 3.0 chain drive, six-cylinder, twin camshaft petrol engines. It is tailored for use with N51/N52/N52K Valvetronic engines and N53/N54/N55 direct injection engines.
Product code: MG98519
Engine timing tool kit for VW, Audi TSI, TFSI 1.8/2.0
A set used for the correct blocking and setting of the timing in 4-cylinder EA888 1.8 R4 16v TSI/TFSI, 2.0 R4 16v TSI/TFSI 2006-2013 VAG petrol engines in the TSI, TFSI EA888 engine series (1.8/2.0).
Product code: CKB10188
Engine timing tool set for Mercedes-Benz (M651)
This engine timing tool set is specifically designed for Mercedes-Benz vehicles equipped with the chain-driven 1.8/2.1 CDI Diesel Engines, identified by the engine code prefix 651.xxx. The set includes tools necessary for accurately positioning the camshaft in the installed position and for the rotation, installation, and dismantling of the crankshaft pulley.
Product code: MG91725
Timing tool set for Opel, Suzuki
For 1.3 CDTI, DDIS diesel engines with timing chain
Product code: MG50310
Timing tool set for Renault, Dacia
This Timing Tool Set is specifically designed for Renault and Dacia models equipped with double camshaft 1.4, 1.6, 1.8, and 2.0 16V engines.
Product code: MG50094
Timing tool set for BMW, Mini, PSA (N13, N18 engines)
Suitable for BMW, Mini Cooper N13 and N18 engines for locking camshaft. The set contains tools for locking the camshaft and the crankshaft.
Product code: MG04A2233
Timing tool set for VW, Audi, Skoda, Seat
It helps to avoid damages of valves and pistons. Suitable for models with 1.0L 3 cylinder engines and 1.2L/1.4L engines.
Product code: MG04A3059
Timing tool set for Renault, Opel, Nissan
This kit is specially designed for Renault, Opel, Nissan Timing Lock Tool Kit specifically designed to service 1.5, 1.9, 2.2 and 2.5 DCI and DTI engines. This comprehensive kit includes all the tools you need to precisely time and adjust your motors, ensuring proper alignment and synchronization during repair or maintenance tasks.
Product code: MG50306
Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines
Timing lock for Ford, Fiat, Citroen, Peugeot 2.2 TDCI engines.
Product code: C01/0179
Belt pulley wrench for BMW diesel engines
Belt pulley wrench for BMW diesel engines.
Product code: C01/0100
Camshaft lock for BMW M52 M54 M56 M52TU engines
Camshaft lock for BMW M52 M54 M56 M52TU engines.
Product code: C01/0033
The key to lock the crankshaft VW / Audi / Seat / Skoda 1.8 TDI TFSI
Product code: W0303
Engine timing tool set for VAG (1.2, 1.4, 1.6 FSi/Tsi engines)
This tool set is specifically assembled for use with VAG 1.2, 1.4, and 1.6 FSi/Tsi engines.
Product code: MG98060A
Adjustable camshaft pulley holder, length 420mm
For tensioning or loosening the belt pulleys, adjustable opening 12-150mm.
Product code: MG50673
Timing tool set for VAG 1.2 TFSI
This professional-grade timing tool set is specifically designed for VAG 1.2 TFSI engines manufactured from 2010 onwards, ensuring precise and secure positioning of engine timing components during maintenance or repair work.
Product code: MG50661
Camshaft timing tool set for BMW, N42, N46, N46T
Camshaft timing tool set for BMW, N42, N46, N46T
Product code: MG50659
Timing tool set for Ford, Mazda
Camshaft and crankshaft locking tool for 1.25-2.0 diesel and petrol engines
Product code: MG50658
Timing tool set for Alfa Romeo, Fiat, Lancia
For Alfa Romeo, Fiat, Lancia 1.4, 1.6, 1.8, 2.0 engines
Product code: MG50632
Timing tool set for Renault
Timing tool set for Renault 16v engines. Laguna, Safrane, TDC 2.0, 2.5 16v 1996-2001
Product code: MG50620
Timing tool set for Ford, Volvo, Mazda
1.25, 1.4, 1.6, 2.0, 2.3, 1.6 v16, 2.0 RS, 1.6 Ti-VRC, 1.8 SCi, 2.0 ST 150, 2.0 XHR petrol, 1.8 TDdi, 1.8 TD, 1.8, 2.2, 2.2 TDCI engines. 1.6 Ti-VCT, 2.0 TDCi engines, Focus, C-Max.
Product code: MG50619
Timing tool set for VAG
For 1.6, 2.0 TDi CR, fifth generation Common Rail diesel (Blue Motion) engines.
Product code: MG50618
Timing tool set for VW
Timing tool set for VW, 2.5TDI PD, 4.9 D/TDI PD
Product code: MG50617
Timing tool set for VW, Audi, Skoda, Seat
Timing belt tensioner, upper dead centre measurer, camshaft locking tool, for VW 1.4, 1.6 FSI, 1.8 Turbo, 1.8 V16, 1.8 Cupra R petrol engines
Product code: MG50603
Timing tool set for BMW, Mini, PSA
BMW Mini camshaft, flywheel locking tools, timing chain tensioner, for 1.4, 1.6 V16 petrol engines
Product code: MG50390
Timing tool set for Chrysler, Jeep and LDV
For 2.5 és 2.8 CRD timing belt engines, Chrysler, Jeep and LDV.
Product code: MG50386
Timing Tool Set for Fiat, Ford, and Lancia 1.2/1.4 8V
The Timing Tool Set for Fiat, Ford, and Lancia 1.2/1.4 8V is an essential kit designed for the precise maintenance and assembly of engine timing components. This comprehensive set is specifically tailored for professionals working on a variety of models from Fiat, Lancia, and Ford.
Product code: MG50372
Timing tool set for VW, Audi
Crankshaft locking tool, camshaft locking tool, panel removal tool, shock absorber tool, ribbed belt tensioner, for 2.8 V30, 2.7 Turbo, 4.2 V40, 4.2, 5.2 FSI, 2.4, 2.6, 2.7, 2.8, 4.2, 6.0 petrol engines, 2.5, 2.7, 3.0 TDI, 3.0 TDI CR
Product code: MG50356
Timing tool set for Volvo
For 4-, 5- and 6-cylinder Twin Cam (except the 3.2l) engines
Product code: MG50340
Timing tool set for Fiat
The Timing Tool Set for Fiat vehicles, specifically designed for Twin Spark 1.4, 1.6, 1.8, and 2.0 16V double camshaft engines, is a comprehensive solution for professional mechanics focusing on precision timing and engine efficiency.
Product code: MG50327
Timing tool set, for BMW, N42, N46, N46T
Timing tool set for BMW, NN42, N46, N46T
Product code: MG50326
Timing tool set for Ford
For 2.0, 2.2, 2.4 TDDI, TDCI, engines with timing chain
Product code: MG50325
Camshaft gear puller for Ford
Camshaft gear puller for Ford
Product code: MG50320
Timing tool set for Renault, Dacia 1.4, 1.6, 1.8, 2.0 16V
This timing tool kit is the perfect choice for a wide range of Renault and Dacia vehicles, especially those with 1.4, 1.6, 1.8, and 2.0 16V petrol engines. It's an essential aid for the precise adjustment and securing of the timing on models such as Clio, Megane, Scenic, Laguna, Espace, and Dacia Logan.
Product code: MG50314
Timing tool set for Fiat, Lancia 1.2 1.4 16V
Timing tool set for Fiat, Lancia 1.2 1.4 16V. Engine codes: 176 B9.000, 182 B2.000, 188 A5.000.
Product code: W0022
Timing tool set for Ford, Mazda 16V Zetec motors
Timing tool set for Ford, Mazda 16V Zetec motors
Product code: W0023
Timing tool set for 1.4, 1.6 FSI VW, Audi, Skoda
Timing tool set for 1.4, 1.6 FSI VW, Audi, Skoda.
Product code: W0026
Timing tool set for Alfa, Fiat, Opel 1.7, 1.9, 2.0 TD/JTD, 2.4 JTD
Timing tool set for Alfa Romeo, Fiat, Opel, Saab, Lancia 1.7, 1.9, 2.0 TD/JTD, 2.4 JTD
Product code: W0035
Camshaft lock for VW, Audi, Seat, Skoda 1.9 TDI SDI
Camshaft lock for VW, Audi, Seat, Skoda 1.9 TDI SDI.
Product code: W0036
Tool for setting the upper dead point of the piston Fiat, Alfa, Lancia
Tool for setting the upper dead point of the piston Fiat, Alfa, Lancia
Product code: W0041
Timing tool set, VW, Audi, Seat, Skoda 1.9 TDI/SDI
Timing tool set, VW, Audi, Ford, Seat, Skoda 4-cyl. diesel engines 1.9 SDI, TDI.
Product code: W0043
Injection pump setting tool set for Ford 2.0/2.4 16V
The tool set is specially designed for adjusting the injection pumps of Ford Transit and Mondeo 2.0, 2.4 liter diesel engines. This kit is guaranteed to fit the mentioned engines, so you can easily maintain and adjust the injection pumps.
Product code: W0044
Timing tool set, Fiat and Iveco 2.3, 3.0 JTD
Timing tool set for Fiat and Iveco 2.3, 3.0 JTD engines.
Product code: W0078
Belt pulley wrench for BMW diesel engines
Belt pulley wrench for BMW diesel, E87, E46, E60, E61, E90, E91.
Product code: W0082
Wrench for shaft belt pulley unscrewing, VW, Audi, Volvo
A special tool that can be used to unscrew the axle disc for VW, Audi and Volvo vehicles.
Product code: W0085
Timing tool set VW/AUDI 2.3/2.8, petrol (2002-2005)
Timing tool set VW/AUDI 2.3/2.8, petrol (2002-2005)
Product code: W0118
Camshaft locking tool for Fiat, Lancia, Ford 1.2 8V, 1.4 8V engines
Camshaft locking tool for Fiat, Lancia, Ford 1.2 8V, 1.4 8V petrol engines
Product code: W0124
Camshaft locking tool BMW Common Rail 2.0 d, 3.0d (TU)
Camshaft locking tool BMW Common Rail 2.0 d, 3.0d (TU) with rack and pinion drive wheels.
Product code: W0126
VCT alignment tool for Ford 1.6 Ti-VCT Focus, C-Max
VCT alignment tool for Ford 1.6 Ti-VCT Focus, C-Max. Engine code: HXDA. OEM: 303-1097.
Product code: W0127
Timing tool set Ford 1.6, 1.8, 2.5 D and TD
Timing tool set Ford 1.6, 1.8, 2.5 D and TD
Product code: W0128
Flywheel locking tool set Ford Mazda Volvo
Flywheel locking tool set Ford Mazda Volvo petrol engines (1991-2010), 1.4 / 1.6 / 1.7 / 1.8 / 2.0 16V
Product code: W0148
Timing tool set Renault Laguna, Megane II 2.0 IDE F5R
Facilitates precise timing adjustments and alignments for specific Renault engines.
Product code: W0152
Timing tool set for Renault 2.0, 2.3 DCI and CDTI
Timing tool set for Renault, Nissan, Opel 2.0, 2.3 DCI and CDTI
Product code: W0153
Timing tool set Opel 2.2 16v chain engine
The Timing tool set Opel 2.2 16v chain engine is a reliable and efficient tool specially designed for Opel vehicles. This special tool helps to secure the engine controls, allowing you to work safely and accurately when servicing or replacing camshafts and valves.
Product code: W0154
Timing tool set Renault 1.2, 1.4, 1.6 1.8, 2.0, 2.0 16v Turbo, 1.5 dCi
Timing tool set Renault 1.2, 1.4, 1.6 1.8, 2.0, 2.0 16v Turbo, 1.5 dCi
Product code: W0156
Timing tool set Alfa Romeo 1.8 / 2.0 16V, 2.0 TS (blue)
This Timing Locking Tool allows you to lock engine camshafts, which is essential for timing chain replacement, timing pulleys, timing belts or other timing system component maintenance.
Product code: W0169
Timing tool set Honda, petrol and diesel 1.6, 1.8, 2.0, 2.3, 3.0 engines
This timing tool set is crafted for Honda vehicles equipped with petrol and diesel engines, ranging from 1.6 to 3.0 liters. Designed with precision, it ensures a smooth and hassle-free timing belt replacement process, especially for engines integrated with a balance shaft.
Product code: W0174
Timing tool set Volvo V 50 16 V 1.8 / 2.0 with chain - petrol
This timing tool set is designed for Volvo V50 16V 1.8 and 2.0 inline petrol engines. The tools are designed to make engine control setup and maintenance easier and more accurate.
Product code: W0177
Timing tool set, Ford, Mazda, Diesel 1.8 TDCi, TCI
Timing tool set, Ford, Mazda, Diesel 1.8 TDCi, TCI
Product code: W0178
Flywheel locking tool, Renault Laguna, Safrane, Espace 2.2 TD
Flywheel locking tool, Renault Laguna, Safrane, Espace 2.2 TD
Product code: W0179
Timing tool set BMW 2.0d N47 / N47S common rail, diesel
The Timing Tool Set specifically designed for BMW 2.0d N47/N47S common rail diesel engines. This comprehensive tool set is a must-have for precise timing adjustments, maintenance, and repairs on these specific engine models.
Product code: W0180
Camshaft sprocket puller Ford, Mazda 1.8 / 2.5 TDCI, TCI, TDDI
This puller is specifically designed to remove camshaft sprockets.
Product code: W0182
Timing tool set, Volvo / Ford 2.5 Turbo petrol
Timing tool set, Volvo / Ford 2.5 Turbo petrol
Product code: W0197
Timing tool set BMW / Rover Diesel Common Rail System
Timing tool set BMW / Rover Diesel Common Rail System
Product code: W0188
Timing tool set VW LT 2.8 TDI
Timing tool set VW LT 2.8 TDI + special wrench for the camshaft
Product code: W0189
Timing tool set VW / Audi 2.4 / 3.2 TDI / 4.2 TDI - petrol
Timing tool set VW / Audi 2.4 / 3.2 TDI / 4.2 TDI - petrol
Product code: W0198
Timing tool set VW, Audi, Seat, Skoda 2.0 TDI PD
Timing tool set VW, Audi, Seat, Skoda 2.0 TDI PD
Product code: W0200
Tensioning key Alfa Romeo / Lancia (female)
The tension wrench specially designed for Alfa Romeo and Lancia cars is an ideal tool for its maintenance and repair. The precise design of this tool fits perfectly with specific screws and components, ensuring easy and efficient work.
Product code: W0202
Timing tool set Fiat Ducato 2.2 JTD
Timing tool set Fiat Ducato 2.2 JTD
Product code: W0204
Timing tool set, Mini Cooper (06-10) 1.6 Diesel
Timing tool set, Mini Cooper (06-10) 1.6 Diesel
Product code: W0209
Timing belt tensioner key Audi / VW
Timing belt tensioner key Audi / VW
Product code: W0210
Timing tool set VW Crafter 2.5 TDI, Transporter LT
Timing tool set VW Crafter 2.5 TDI, Transporter LT
Product code: W0211
Injection pump gear removal BMW, Opel, Land Rover
Injection pump gear removal BMW, Opel, Land Rover
Product code: W0229
Timing tool set, Alfa Romeo 156, 166, GTV, Lancia 2.5, 3.0 V6 24V
Timing tool set, Alfa Romeo 156, 166, GTV (96-07) Lancia 2.5, 3.0 V6 24V, 4 cubes (red) allows the engine camshafts to be clamped during maintenance or repair work. Thanks to its red color, it can be quickly found in the toolbox or in the workshop.
Product code: W0241
Puller camshaft sprocket VW Audi 1.6 TDI / 2.0 TDI CR
Designed with precision and durability in mind, this puller ensures hassle-free removal of the sprockets without causing any damage to the engine components. The camshaft sprocket puller simplifies the process of dismantling the camshaft assembly.
Product code: W0242
Timing tool set VW, Audi, Seat, Skoda 1.6 TDI, 2.0 TDI Common Rail
Timing tool set VW, Audi, Seat, Skoda 1.6 TDI, 2.0 TDI Common Rail
Product code: W0243
Dial strip Opel Kadett, Astra, Vectra, 1.6 / 1.7 - Diesel
Dial strip Opel Kadett, Astra, Vectra, 1.6 / 1.7 - Diesel
Product code: W0245
Timing tool set BMW N62, N73 engines
Timing tool set BMW N62 engines; N62TU; N73 / PETROL V8 3.6/4.0/4.4/4.8 N62/N62TU + 6.0 V12 N73 timing chain
Product code: W0252
Timing tool set for Citroen and Peugeot 2.0 16V
Timing tool set for Citroen and Peugeot 2.0 16V with variable phase timing
Product code: W0255
Timing tool set Chevrolet, Opel Antara 2.0 Diesel common rail
Timing tool set Chevrolet Nubira, Evanda, Captiva, Opel Antara 2.0 Diesel common rail
Product code: W0256
Timing tool set, Volkswagen, Audi, Seat 1.9 SDI / TDI
Timing tool set, Volkswagen, Audi, Seat 1.9 SDI / TDI
Product code: W0259
Timing tool set, Renault, Nissan, Opel, 1.6 16V engines
Timing tool set, Renault, Nissan, Opel, 1.6 16V engines.
Product code: W0260
Camshaft pulley holder for Subaru Impreza 2.5 Boxer
Camshaft pulley holder for Subaru Impreza 2.5 Boxer.
Product code: W0263
Timing tool set Mini One, Cooper 1.6, Cooper 1.6s, petrol, chain
Timing tool set Mini One, Cooper 1.6, Cooper 1.6s, petrol, chain
Product code: W0264
Tool for setting the oil pump Ducato, Iveco, Citroen Jumper - 2.3 Diesel Common Rail
Efficiently set the oil pump on Ducato, Iveco, Citroen Jumper 2.3 Diesel Common Rail engines with this reliable, easy-to-use tool designed for accurate alignment and optimal performance.
Product code: W0278
Timing tool set Audi VW Skoda Seat 2.4, 2.7, 2.8, 3.0 V6 30V
Timing tool set Audi VW Skoda Seat 2.4, 2.7, 2.8, 3.0 V6 30V
Product code: W0269
Timing tool for Audi, VW 3.3, 3.7, 4.2 A6 A8
Timing tool for Audi, VW 3.3, 3.7, 4.2 A6 A8.
Product code: W0270
Timing tool set Lancia Kappa 5 cyl. 2.0 20v (Silver)
Timing tool set Lancia Kappa 5 cyl. 2.0 20v (Silver)
Product code: W0271
Key crankshaft Citroen / Peugeot, petrol 1.8/2.0/2.2 16V HPI "EW" belt
Key crankshaft Citroen / Peugeot, petrol 1.8/2.0/2.2 16V HPI "EW" belt
Product code: W0273
The key to lock the crankshaft Volkswagen Audi Skoda 1.4-1.6 16V petrol
This tool is designed to fit into the engine's timing components and secure the crankshaft in place during procedures such as timing belt replacement or engine timing adjustment.
Product code: W0275
Cam lock Fiat Brava / Bravo / Marea 2.0 20V - petrol (pink)
Product code: W0277
Camshaft locking set Peugeot Citroen 2.7 HDI V6
Camshaft locking set Peugeot Citroen 2.7 HDI V6.
Product code: W0284
Crankshaft locking tool Opel 3.0 CDTI
The Crankshaft Locking Tool for Opel 3.0 CDTI is a specialized tool used to lock the crankshaft in place when working with the crankshaft pulley during maintenance or repair tasks on Opel vehicles equipped with the 3.0 CDTI diesel engine.
Product code: W0286
Key variator Volkswagen
On Volkswagen vehicles, the variator key (CVT variator tool) is a special tool used to disassemble or maintain the continuously variable transmission (CVT) variator. The variator key helps to disassemble and assemble the variator unit, which is responsible for the operation of the transmission.
Product code: W0290
Cam lock for Fiat, Alfa Romeo, Lancia 1.4 MultiAir
Camshaft lock for Fiat, Alfa Romeo, Lancia 1.4 MultiAir engines.
Product code: W0295
Cam lock set for Ford 1.6 Ti-VCT petrol engines
Camshaft, crankshaft, flywheel lock set for Ford 1.6 Ti-VCT petrol engines
Product code: W0297
Timing lock set for Ford diesel and petrol engines
Universal timing lock set for Ford diesel and petrol engines. With 3 interchangeable adapters.
Product code: W0298
Cam lock Fiat Bravo / Brava / Marea, Lancia Delta / Debra 1 set. - Petrol 1.8 16V 115 KM (dark green)
Product code: W0299
Timing lock for Ford, Peugeot, Volvo - 2.0, 2.2 D
Timing lock for Ford and Peugeot 807, 607, 407, Volvo - 2.0, 2.2 D.
Product code: W0300
Puller for replacement hydraulic tappets - Opel 8V
Product code: W0307
Press the upper crossover pins Jeep Cherokee, Grand Cherokee, Wrangler
Product code: W0313
Timing lock for BMW E39, E46, E61, E38, E65, E66, X3, X5 Vanos engines
Timing lock for BMW 2.0 2.2 2.3 2.5 2.8 3.0 petrol engines.
Product code: W0480
Lock crankshaft Audi 3.0 V6
To lock the crankshaft on Audi V6 gasoline engines, a crankshaft locking tool is used. This specialized tool helps immobilize the crankshaft, ensuring accurate timing alignment during maintenance or repair procedures.
Product code: W0331
Timing lock for Ford 1.25, 1.4, 1.6 16V engines
Timing lock for Ford 1.25, 1.4, 1.6 16V engines.
Product code: W0332
Timing lock for Ford, Mazda petrol Zetec engines
Camshaft locking bar and 3 pins. For 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 16V and 1.8 TDI petrol engines.
Product code: W0333
Timing locking pin for Renault, Opel, Nissan 1.5 DCI
For locking the crankshaft on Renault 1.5 DCI engines.
Product code: W0341
Timing locking pin fo Renault, Opel, Nissan 1.9 DCI engines
TDC timing pin used on a variety of diesel and petrol Renault engines.
Product code: W0342
Camshaft locking pins for 1.5, 1.9, 2.2, 2.5 DCi engines
A set of 3 timing locking pins for 1.5, 1.9, 2.2, 2.5 DCi engines.
Product code: W0343
Timing lock (adapter,pin) for Renault 2.0 DCi
The Timing locking (adapeter,pin) is a special tool used to maintain and service the timing system of Renault 2.0 liter diesel engines. This is a tool that helps to accurately set the timing of the engine timing and to fix the camshafts.
Product code: W0344
4 adapters to block the timing Renault / Opel / Nissan 1.5; 1.9; 2.0; 2.2 DCI (in box)
The Timing Adapter Set designed specifically for Renault, Opel, and Nissan vehicles with 1.5, 1.9, 2.0, and 2.2 DCI engines. This comprehensive set includes four adapters.
Product code: W0345
Cam lock Fiat 0.9 TwinAir (chain)
When you replace or perform maintenance on the timing chain on these Fiat and Alfa Romeo models, the cam lock ensures precise fixing. This is essential so that the timing chain and associated components can be adjusted accurately, ensuring proper engine functioning.
Product code: W0356
Adapters for mounting and dismounting the front control arm bolts for Renault, Dacia
These adapters work with our universal press tool (W0099 - Universal press for bolts and sleeves). Adapters for mounting and dismounting the front control arm bolts.
Product code: W0353
Cam lock Citroen / Peugeot 1.4 16V "ET"
Product code: W0358
Lock camshaft Chrysler 2.8L Diesel after 2007
Lock camshaft Chrysler 2.8L Diesel after 2007
Product code: W0355
Tool for setting the GMP Volkswagen 2.5 TDI
Product code: W0374
Timing lock for BMW 2.5, 3.0 petrol engines: N51, N52, N52K, N53, N54
Timing lock for BMW 2.5, 3.0 petrol engines with chain: N51, N52, N52K, N53, N54.
Product code: W0382
Timing lock for Opel EcoFlex 1.0, 1.2, 1.4 16 valve engines (2009 and on)
Timing lock for Opel EcoFlex 1.0, 1.2, 1.4 16 valve engines (2009 and on).
Product code: W0383
Camshaft lock for Mercedes 2.0, 2.1, 2.2 CDI
A camshaft lock tool for Mercedes 2.0, 2.1, and 2.2 CDI engines is a specialized tool used to lock the camshafts in place during maintenance or repair procedures. These engines are commonly found in various Mercedes-Benz models.
Product code: W0386
Adapters to bolts down Jeep - Cherokee, Grand Cherokee, Wrangler
Product code: W0398
Press the down crossover pins Jeep Cherokee, Grand Cherokee, Wrangler
Product code: W0399
Key locking the crankshaft Ford Mondeo, Transit 2.0 2.2 2.4 3.2 Duratorq TDCi (01-)
Product code: W0407
Lock camshaft for Citroen 1.9D / TD engines (94-02)
This tool is specifically designed for the precision locking of the camshaft, facilitating correct timing during belt changes and other engine repair tasks. It ensures that the camshaft remains in a fixed position, preventing unwanted rotation which could lead to engine damage.
Product code: W0412
Lock camshaft BMW gasoline 1.8 / 2.0 N42 / N46 / N46T Valvetronic
Product code: W0414
Lock Crankshaft VW AUDI V6 diesel; gasoline
To lock the crankshaft on VW and Audi V6 diesel or gasoline engines, a crankshaft locking tool is used. This specialized tool helps immobilize the crankshaft, ensuring accurate timing alignment during maintenance or repair procedures.
Product code: W0418
Key to timing belt tensioner VW, Audi, Seat, Skoda 1.2 / 1.4 TSI / TFSI (2013) (T10499)
This is an essential tool for precise and efficient timing belt adjustments. Designed specifically for 1.2/1.4 TSI/TFSI engines found in VW, Audi, Seat, and Skoda vehicles manufactured in 2013. It ensures accurate and secure timing belt tension adjustments for optimal engine performance.
Product code: W0419
Key to lock the pulley Renault, Peugeot, Citroen 3.0 V6
Product code: W0435
Magnetic flywheel puller for Suzuki, M50x1,5
Magnetic flywheel puller for Suzuki, M50x1,5.
Product code: W0429
Timing lock for Renault, Peugeot, Citroen 3.0 V6 24V petrol engines
Timing lock for Renault, Peugeot, Citroen 3.0 V6 24V petrol engines.
Product code: W0436
Key to regulation of the camshaft (double) VW AUDI 1.8 / 2.0 TFSI Fsi
The Key to Regulation of the Camshaft (Double) for VW AUDI 1.8/2.0 TFSI FSI engines is a specialized tool designed to assist in the precise adjustment of the camshafts in these specific engine models.
Product code: W0449
Injection pump puller for Chrysler Voyager 2.5 TD
Injection pump puller for Chrysler Voyager 2.5 TD
Product code: W0455
Camshaft lock for Ford 1.6 EcoBoost
Camshaft lock for Ford Fiesta, Focus, Galaxy, Kuga, Mondeo, Transit, Tourneo, C-Max, B-Max 1.6 EcoBoost engines.
Product code: W0457
The key for assembly and disassembly, and locking pulley BMW M52 / M54 / M56
Product code: W0458
Lock injection pump Rover, Land Rover, Jaguar 3.0
Product code: W0465
Timing lock for Volvo 2.0 and 2.4 diesel engines
Timing lock for Volvo 2.0 and 2.4 diesel engines.
Product code: W0461
Timing lock Land Rover 2.5D / Td5 on the timing chain
A tool often used to fix the control of the Land Rover 2.5D/Td5 engine on the control locking chain. This special tool locks the timing chain in place, preventing it from moving or shifting during timing adjustment.
Product code: W0466
Lock timing Vanos BMW N53, BMW N54 Vanos
Product code: W0475
Lock timing Mercedes 2.0 2.1 2.2 CDI set
Product code: W0477
Lock pulley shaft Volvo (T4, T5) 1.6, 2.0 GDTI
Product code: W0486
Lock crankshaft BMW 1.6 / 2.0 / 3.0 - N47 / N57
Product code: W0489
Timing lock set for BMW 2.0, 3.0D N47, N47S, N57 diesel (2007 - 2012)
Timing lock set for BMW 2.0, 3.0D N47, N47S, N57 diesel (2007 - 2012).
Product code: W0491
Axle mounting bolts, adapters for Volkswagen and Audi 2.0 - 4.2 liter engines, 3pcs
Bolts, adapters for fixing and stabilizing the shaft.
Product code: W0492
Timing lock for Citroen, Peugeot, Mini 1.4 1.6 16V VTi, THP
Timing lock for Citroen, Peugeot, Mini 1.4 1.6 16V VTi, THP.
Product code: W0493
Timing lock Opel, Fiat 1.6, 1.8 16V
Timing lock Opel, Fiat, Chevrolet 1.6, 1.8 16V Twinport engines.
Product code: W0496
BMW crankshaft pulley turning tool
BMW crankshaft pulley turning tool for M47, M57, N47, N57.
Product code: W0498
Crankshaft holding wrench Opel 1.6 SIDI
Crankshaft holding wrench for Opel Cascade, Astra J, Zephyr C, Insignia 1.6 Turbo SIDI, SIDI Turbo, EcoFLEX petrol.
Product code: W0511
Lock and pulley puller Jaguar and Land Rover
This tool is specifically designed for Jaguar and Land Rover 3.2, 3.5, 4.0, 4.2, 4.4 V8 engines. The pulley can be stably fixed or removed from the motor shaft with the help of the pulley lock and puller. This allows belt replacement or pulley maintenance during other operations.
Product code: W0525
Camshaft Lock Opel 1.0 / 1.4 SIDI, EcoFlex Turbo Petrol
Camshaft Lock Opel is used for locking the camshaft in place during maintenance or repair procedures. It is specifically designed for use with Opel vehicles equipped with 1.0 or 1.4 SIDI EcoFlex Turbo Petrol engines.
Product code: W0527
Rear bushing puller for Opel Corsa B, C, Tigra
Rear silent puller for Opel Corsa B, C, Tigra. Opel OEM: 24443815, 5402636.
Product code: W0539
Camshaft lock for Opel 2.0, 2.4 Ecotec engines with timing chain
Camshaft lock for Opel, Chevrolet, SAAB 2.0, 2.4 Ecotec engines with timing chain.
Product code: W0529
Puller Injectors Chrysler Voyager 2.5; 2.8 CRD
Product code: W0538
Adapter for blocking and turning the camshaft 1.8 / 2.0 TFSI
Product code: W0561
Balancing shaft lock with crankshaft alignment lock BMW N47
The balancing shaft lock is designed to hold the balancing shaft(s) in place during maintenance or repair work. The tool ensures that they do not move while other components are being serviced or replaced. The crankshaft alignment lock is used to keep the crankshaft in the correct position during maintenance tasks.
Product code: W0542
Lock to control the timing of Saab Opel Chevrolet 1.0; 1.8; 2.0
The purpose of the device is to stably fix or lock the engine control during work processes such as replacing camshafts, adjusting valve clearance or maintaining the control chain.
Product code: W0547
Lock the timing of VW, Audi, Seat, Skoda - 2.0 FSI / TFSI – petrol
Product code: W0554
Mercedes timing lock M271 : E18ML DE18ML E16ML
The "Mercedes timing lock M271" is a specialized tool used for locking the timing components in place during maintenance or repair procedures on Mercedes-Benz engines with the M271 designation. The M271 engine is a series of inline-four-cylinder gasoline engines used in various Mercedes-Benz models.
Product code: W0555
A key for locking the pulley shaft Ford / Volvo 1.4, 1.6, 1.8, 2.0, 2.3 16v Duratec
Product code: W0566
A key for locking the camshaft Fiat, Citroen 1.3 JTD
This tool is a special tool used to fix the control of Fiat and Citroen 1.3 JTD type engines. It helps to keep engine control components in a stable position while other components like camshafts, timing chain, etc. replace or service.
Product code: W0571
Timing lock Jaguar 2.0 GTDi, Land Rover 2.0 Si4
Product code: W0578
Locking of the flywheel and the pulley shaft Renault Nissan 1.4, 1.6; 2.0; 2.3
Product code: W0584
Chain tensioner BMW N40, N42, N45, N46, N52 and N54 / Mini N12, N14, N16 and N18
The chain tensioner can be used in BMW N40, N42, N45, N46, N52, N54 and Mini N12, N14, N16, N18 engines. The chain tensioner serves to properly tension the timing chain in the engine, ensuring accurate operation and reliability.
Product code: W0585
The keys for locking the pulley shaft Mercedes M112, M113, M271, M272, M273, M642
Product code: W0604
Key camshaft actuator BMW / Mini B38 B46 B48
Product code: W0660
Camshaft lock for Mercedes A, E, S and Vito
Camshaft lock for Mercedes-Benz 1.8, 2.1 CDI engines from 2012 with code: 651. OEM: 651 589 00 40 00.
Product code: W0590
The key to the timing belt tensioner VW, Audi, Skoda 1.4 TSI / TFSI 16mm
Product code: W0597
Camshaft lock for Mercedes Benz M642, 3.0 24v V6
The Timing lock for Mercedes Benz M642, 3.0, 24v, V6 diesel engines, which is used for stable locking of camshafts. This tool helps to maintain, install and service the camshafts of Mercedes Benz M642, 3.0, 24V, V6 diesel engines.
Product code: W0600
Crankshaft lock BMW, Mini B37 B38 B47 B48 B58
Product code: W0607
Timing lock Jaguar, Land Rover 4.0, 4.2, 4.4 petrol by 2010
This tool allows the camshafts to be secured securely in the engine when maintenance or repair is required. The timing gear is an extremely important part of the operation of the engine, and with the help of the fixing tool, accurate adjustment and correct installation can be carried out.
Product code: W0609
Balance shaft lock Citroen , Peugeot , Ford , Land Rover 2.2
The purpose of the balance shaft lock tool is to prevent the balance shaft from rotating while other components are being worked on, such as timing belt replacement or engine repair. By immobilizing the balance shaft, the tool ensures accurate positioning and alignment of the related components.
Product code: W0611
The key to rotate the crankshaft Audi 2.5 RS TFSI ( T03003 )
Product code: W0613
Lock wheel high pressure pump Volkswagen, Audi 3.6 L
Product code: W0617
Lock balancer shaft BMW N20 / N26 + Repair kit seal oil pump
Product code: W0618
Ford Transit air conditioning pulley holding wrench
A/C compressor clutch locking wrench for Ford Transit and Transit Custom PHEV (from 2012). OEM: 412-157.
Product code: W0713
Variable timing cam lock for Volvo V40, S40
VCT lock for Volvo V40, S40.
Product code: W0636
Camshaft lock for Opel 1.4 without Turbo
Product code: W0654
Crankshaft locking pin for Volvo, Ford, Renault
This is a specialized tool that ensures stable fastening of the crankshaft during maintenance or repair. This pin allows for accurate crankshaft positioning, which is essential for proper timing adjustments and component changes.
Product code: W0655
Camshaft locking tool for Mercedes M271, C200, C180, E260
Use this tool to accurately position and align the TDC to fix the camshaft in the timed position (direct center), so that the cam phaser can be effectively removed while tightening and loosening the phaser bolt. (Note that the camshaft must be aligned when removing and installing the timing chain)
Product code: W0662
Face mill cutter for the shaft Porsche 911 G 2.7, 3.0 and 3.2
This face mill cutter is specifically designed for cutting and preparing Porsche 911 G 2.7, 3.0 and 3.2 engine shafts. Thanks to the M12x1.5 thread size, it fits easily on shafts with the appropriate thread.
Product code: W0672
Key variator VW, Audi 4.2, 2.5, 5.0
The Key Variator is a specialized tool designed for VW and Audi vehicles with specific engine types, including 4.2L, 2.5L, and 5.0L engines. This tool is used for setting, adjusting, and tensioning the timing chain with a camshaft adjuster (T40079).
Product code: W0675
Camshaft pulley holding wrench Audi, VW, Seat, Skoda 1.0, 1.2, 1.4, 1.6 TSI
Camshaft pulley holding wrench Audi, VW, Seat, Skoda 1.0, 1.2, 1.4, 1.6 TSI engines. Designed for VAG cars. It is an essential tool for accurate and efficient V-belt adjustment.
Product code: W0679
Timing lock for VW Polo, Skoda Fabia 1.2 6V and 12V
Gasoline VAG 1.2 engine camshaft retaining set, suitable for holding the camshaft of single camshaft 6-valve BMD and 12-valve AZQ, BME Skoda, Volkswagen, Seat cars in the service position.
Product code: W0682
Crankshaft lock for BMW 1.6D and 2.0D (after 2013)
Crankshaft lock for BMW 1.6D and 2.0D (manufactured after 2013). Engine code: N47
Product code: W0688
Crankshaft lock Fiat Opel 1.9 D; 1.9 TD; 1.9 JTD; 2.4 JTD
The Crankshaft Lock for Fiat Opel 1.9 D, 1.9 TD, 1.9 JTD, and 2.4 JTD engines is a specialized tool designed to assist in precise and safe engine maintenance. The crankshaft lock ensures the crankshaft remains fixed in place, preventing any unintended movement during the disassembly or assembly process.
Product code: W0691
Timing lock for Ford 1.6 Ecoboost SCTi, Ti-VCT Ecoboost
Timing lock set for holding the camshaft in service position.
Product code: W0703
Air conditioning pulley locking tool for Ford S-Max, C-Max, Focus
The Air Conditioning Pulley Locking Tool for Ford S-Max, C-Max, and Focus is a specialized tool designed specifically for immobilizing the air conditioning (A/C) compressor pulley in Ford vehicles.
Product code: W0714
Camshaft pulley locking tool - VW 1.8 / 2.0 TFSI
The Camshaft Pulley Locking Tool for VW 1.8/2.0 TFSI is a precision-engineered device designed to assist in the maintenance and repair of gasoline engines equipped with direct injection technology, particularly the 1.0, 1.8, and 2.0 TFSI engines commonly found in Audi, Seat, Skoda, and VW vehicles.
Product code: W0723
Engine timing tool set for Ford
This versatile engine timing tool set is specifically designed for a wide array of Ford models, encompassing both belt and chain driven petrol and diesel engines.
Product code: MG91696
Timing lock Opel 1.2, 1.2L-T (RPO LIH)
Designed specifically for the Opel 1.2 1.2L-T (RPO LIH) engine, guaranteeing exact alignment and fit during use.
Product code: W0731
Crankshaft locking kit for FordTransit 2.2 TDCi
By securing the crankshaft and flywheel in position, it ensures that the TDC (Top Dead Center) sensor can be accurately set, especially crucial after its removal when working on the cam chain drive system.
Product code: MG91722
Engine timing locking tool set for BMW (N20/N26)
This engine timing locking tool set is specifically designed for the newer BMW N20 and N26 4-cylinder turbo engines. The set includes specialized tools for fixing the camshaft and the VANOS encoder wheel in the top dead center position, crucial for precise engine timing and maintenance.
Product code: MG91302
Diesel engine locking set for VAG (1.2, 1.4, 1.9 belt driven engines)
This diesel engine locking set is designed for VAG (Volkswagen Auto Group) vehicles equipped with 1.2D, 1.4D, and 1.9D TDi PD (Pumpe Duse) engines featuring hydraulic belt tensioners.
Product code: MG91637
Engine timing tool set for Jaguar, Land Rover (2.0 petrol engine)
This specialized engine timing tool set is designed for the precise servicing of Jaguar and Land Rover vehicles with 2.0 petrol engines.
Product code: MG91675
Engine timing tool set for Audi (2.0, 2.8, 3.0 engines)
This comprehensive Engine Timing Tool Set is specifically designed for Audi vehicles, providing all the necessary tools for alignment, adjustment of the camshaft, and replacement of the timing chain.
Product code: MG91666
Engine timing tool set for VAG (2.4, 3.2, 4.2, 5.0, 5.2 engines)
This comprehensive engine timing tool set is expertly designed for a wide range of VAG engines, including 2.4, 3.2, 4.2, 5.0, and 5.2 variants. It is an indispensable kit for professionals working on Audi V6, V8, and V10 petrol engines, ensuring precision in camshaft and crank locking tasks.
Product code: MG91668
Engine timing tool set for Jaguar, Land Rover (V8 5.0 engine)
This specialized engine timing tool set is precisely designed for the V8 5.0 engine found in select Jaguar and Land Rover models.
Product code: MG91702
Engine timing tool set for BMW (N63/N74)
This engine timing tool set is expertly crafted for BMW vehicles equipped with N63 and N74 engines. It is an indispensable kit for any mechanic undertaking intricate engine work, such as replacing the timing chain, repairing the cylinder head, or replacing the cylinder head gasket.
Product code: MG91754
Engine timing tool set for Opel, Saab, Chevrolet (2.0 16V engine)
This engine timing tool set is specifically designed for use with the 2.0 16V SOHC engines found in certain Opel, Saab, and Chevrolet models. It is a crucial kit to ensure the correct positioning of the camshafts and crankshaft when changing the timing belt.
Product code: MG91772
Engine timing tool set for VAG (1.8/1.8T,2.0 FSi/TFSi engines)
This tool set is specifically designed for the comprehensive servicing of VAG 1.8/1.8T and 2.0 FSi/TFSi twin camshaft engines. It's an essential toolkit to working on these specific VAG models, ensuring accurate belt tensioning and precise timing adjustments.
Product code: MG91887
Engine timing tool set for Audi (3.0 V6 30V engines)
This comprehensive tool set is specifically designed for Audi 3.0 V6 30V engines. It includes a range of tools for setting and locking the camshaft and crankshaft, along with additional instruments for adjusting the camshaft sprocket and belt tensioner. This kit is essential to working on Audi vehicles, ensuring precise timing adjustments and maintenance.
Product code: MG91888
Engine timing tool set for Porsche, Audi (4.5, 4.8 engines)
This engine timing tool set is specifically designed for adjusting the camshaft timings in Porsche and Audi vehicles equipped with 4.5 and 4.8 engines. The set is particularly suited for a range of Porsche models, including the Cayenne and Panamera.
Product code: MG91901
Engine timing tool set for Fiat, Alfa Romeo, Ford (1.2, 1.4 8V engines)
This engine timing tool set is expertly designed for use with 1.2 and 1.4 8V engines in select Fiat, Alfa Romeo, and Ford models. It includes a crankshaft locking tool, a camshaft setting plate, and a belt tensioner adjuster specifically for the 1.2 engine.
Product code: MG93396
Engine timing tool set for VAG (1.2, 1.6, 2.0 TDi engines)
This Engine Timing Tool Set offers a comprehensive solution for working on VAG 1.2, 1.6, and 2.0 TDi engines. It is expertly designed to cater to both Pumpe Duse and common rail diesel engines, ensuring broad compatibility across various models. The kit is not only suitable for a range of VAG models but also extends its utility to vehicles from Ford, Dodge, and Mitsubishi.
Product code: MG94105
Engine timing tool set for VAG (1.6, 1.8, 1.8T, 2.0 engines)
This engine timing tool set is designed for a wide range of VAG and Ford diesel and petrol engines, including 1.6, 1.8, 1.8T, and 2.0 variants. It's an essential toolkit for the timing belt replacement, servicing the chain in head, and tensioner applications, particularly in 1.8/1.8T engines.
Product code: MG94106
Camshaft setting tools for Audi (V8 4.2 40V engine)
This set of Camshaft Setting Tools is specifically designed for Audi's 4.2L 40-valve V8 engines, commonly found in models such as the Audi B6 S4, Audi B7 S4, Audi A6, Audi A8, and the Volkswagen Phaeton. These tools are crucial for accurately fixing the position of the camshaft position sensor rotor ring during the installation of camshaft timing chains.
Product code: MG9411202
Engine timing tool set for Opel (2.0 engine)
This engine timing tool set is specifically designed for Opel vehicles with 2.0 engines, ensuring that the camshafts are securely locked in their timed position during timing chain replacement. It's an essential toolkit for the accurate and safe replacement of the timing chain within the cylinder head.
Product code: MG97047
Engine timing tool set for Fiat, Alfa Romeo, Lancia (1.2, 1.4 engines)
This tool set is curated for the specific requirements of Fiat, Alfa Romeo, and Lancia vehicles equipped with 1.2 and 1.4 engines. It is an indispensable kit for everyone undertaking belt replacement and other timing-related tasks on these vehicles, encompassing both early and later variants of these engines.
Product code: MG98071
Engine timing tool set for BMW, Mini, PSA (1.4, 1.6)
This tool set is expertly designed for the 1.4 and 1.6 16v Valvetronic direct injection, chain drive petrol engines found in a range of BMW, Mini, Peugeot, and Citroën vehicles. The kit includes essential tools for setting and locking the engine timing, crucial for precise engine maintenance and repair.
Product code: MG98302
Engine timing tool set for BMW, Mini, PSA (1.4, 1.6, 1.8, 2.0, 2.5, 3.0 engines)
This Engine Timing Tool Set is meticulously designed for the removal and installation of the timing chain assembly in a wide range of BMW, Mini, and PSA engines. It is an essential collection of tools for everyone engaged in comprehensive engine work on these specific models.
Product code: MG98304
Engine timing tool set for BMW (N43)
This tool set is meticulously tailored for BMW vehicles equipped with the N43 engine. It is a comprehensive kit designed for checking, adjusting, and setting camshaft timing, as well as removing and replacing the cam chain.
Product code: MG98515
Engine timing tool set for VAG (2.4, 3.2 FSI, V6, V8, V10 engines)
This tool set is meticulously designed for use with various VAG engines, including the 2.4 and 3.2 FSI, as well as Audi's V6, V8, and V10 engines. It is an indispensable tool kit in checking and adjusting the engine timing for these specific engine types.
Product code: MG98516
Timing tool for VW, Audi, Seat, Skoda 1.0, 1.2, 1.4 TSI Petrol engines
It's specially crafted for the alignment and correct timing of the engines, ensuring efficient and safe engine repairs or maintenance tasks. This tool is made of durable materials to withstand regular professional use.
Product code: W0739
Engine timing tool set for Ford (1.6 TI-VCT engines)
This comprehensive engine timing tool set is specifically designed for Ford 1.6 Duratec engines with variable valve timing, including the 1.6 SCTi/Ti-VCT Ecoboost and 1.6gtdi models, as well as the newer 1.5L Ecoboost engines from 2014 onwards.
Product code: MG91684
Engine timing tool set for Opel, Saab, Chevrolet (2.0, 2.4 turbo engines)
This comprehensive engine timing tool set is designed specifically for the timing chain removal and replacement on 2.0L and 2.4L turbocharged twin-cam petrol engines, commonly found in various models of Vauxhall, Opel, Saab, and Chevrolet. It's tailored to work with A20NHT & A24XF engines.
Product code: MG91717
Flywheel locking tool set for Jaguar, Land Rover
This Flywheel Locking Tool Set is specifically designed for use on various models of Jaguar and Land Rover vehicles. Enabling the secure locking of the flywheel when performing tasks such as removing or replacing the front pulley bolt.
Product code: MG97059
Engine timing tool set for VAG (2.7, 3.0 V6 TDI engines)
This engine timing tool set is expertly crafted for servicing Volkswagen and Audi vehicles equipped with the 2.7 and 3.0 V6 common rail, chain-driven diesel engines. The set includes specialized adaptors and alignment tools, ensuring precise timing and alignment during maintenance.
Product code: MG98513
Timing tool set for Ford
For 1.25, 1.4, 1.6, 2.0, 2.3, 1.6 v16, 2.0 RS, 1.6 Ti-VRC, 1.8 SCi, 2.0 ST 150, 2.0 XHR petrol, 1.8 TDdi, 1.8 TD, 1.8, 2.2, 2.2 TDCI engines
Product code: MG50375
Timing tool set for BMW, Land Rover
This timing lock set is designed for BMW and Land Rover vehicles, featuring components essential for locking the camshaft and crankshaft, tensioning the timing belt, removing the injector pump, and adjusting the chain tension. It's suitable for a wide range of engine types, including 4 and 6 cylinder 2.0D 16V, 1.8, 2.0, 2.5, 3.0D, 5.2 TD, and TDS engines.
Product code: MG50374
Camshaft sprocket locking tool for VAG (1.8, 2.0 TFSI engines)
This tool is specially designed for use with VAG 1.8 and 2.0 TFSI engines. It is facilitating the secure locking of both intake and exhaust camshafts. Particularly useful when loosening the central bolts of the camshaft sprockets.